CM4 NAS Mini-Computer Kit
Designed For Raspberry Pi Compute Module 4
Network Storage | USB 3.2 | Dual Gigabit Ethernet ports | 4G
* the Compute Module 4 is NOT included.
Features
- All-in-one Mini-Computer, mainly designed for home, small home office, etc.
- Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required
- Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives
- Onboard MINI PCIE connector for installing 4G module
- 2× HDMI 4K output interfaces
- Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.
Specifications
| CM4 SOCKET | Suitable for all variants of Compute Module 4 |
|---|---|
| NETWORKING | Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1) |
| MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol) | |
| Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet access | |
| M.2 | Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280) |
| USB | USB 3.2 Gen1 (5Gbps) port× 2 |
| CSI CAMERA | MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector |
| HDMI | HDMI × 2, supports 4K 30fps output |
| AUDIO | 3.5mm earphone/mic jack |
| RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
| TF CARD SLOT | TF card socket for Compute Module 4 Lite (without eMMC) variants |
| POWER INPUT | Type-C (5V 4A) |
| DIMENSIONS | 128 × 122 × 36mm |
Dual Solid State Drives Slots
Onboard 2× M.2 M KEY Slots, Support All Sizes Of NVME Solid State Drives
(2230, 2242, 2260, 2280)
VESA Mounting Support
Supports 100×100mm And 75×75mm Standard VESA Holes
for reference only, the stand and display are NOT included.
Onboard Rich Interfaces
Precise Cut-Out With Clear Label
Each Cut-Out Is Completely Aligned With The Connector
Applications
Supports Connecting With Multiple Peripheral Devices, Suitable For Various Application Scenarios
for reference only, please check the Package Content for the detailed part list
Installation Instructions
* for reference only, the CM4 is NOT included.
Dimensions
Resources
WIKI: www.waveshare.com/wiki/CM4-NVME-NAS-BOX
Package Contents:
Weight: 0.551 kg
- CM4-NVME-NAS-BASE x1
- Metal case (top and bottom) x1
- Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
- 30×40mm Silicone thermal tape x1
- 15×15mm Silicone thermal tape (2PCS) x1
- 7×7mm Silicone thermal tape (2PCS) x1
- Antenna connector rubber plug (2PCS) x1
- Screws pack x1
