LED Blink with Raspberry Pi
- Raspberry Pi 3 B+
- SD Card
- Micro USB Cable with Adapter
- Monitor with HDMI cable
- Mouse and Keyboard
- 2 Jumpers
- 330ohm resistor
Step 1: Flashing Operating System in SD Card
Step 2: Insert the SD Card in Raspberry Pi Board along with Mouse, Keyboard, Monitor and power adapter.
Negative(shorter) leg of LED on pin 6 (ground)
Positive(longer) leg of LED on pin 8(GPIO14) through a 330ohm resistor
Step 3: Connect LED on Breadboard
Step 3: Program in python
Code for the project can be found here.
Author: Nakul Garg