ThinkRobotics Upgraded MK3S+ 3D Printer

SKU: 3D7001
₹ 97,999.99 ₹ 135,999.99 -28% OFF

Variant

Variant 1 Variant 2 Variant 3

ThinkRobotics Upgraded MK3S+ 3D Printer

SKU: 3D7001
₹ 97,999.99 ₹ 135,999.99 -28% OFF

Inclusive of 18% GST

Variant

Variant 1 Variant 2 Variant 3

Products will be delivered between 1 and 5.

Description Reviews

The current delivery time is 1-3 weeks depending on the upgrade you choose!

The ThinkRobotics MK3S+ with BondTech extruder upgrade is our latest offering in the world of 3D printers.

These are the 3D printers that we use at our Printing Farm, producing more than 500 OTTOs a month, and fulfilling a variety of industrial 3d printing projects with exotic materials such as Carbon Fiber Nylon and Carbon Fiber Polycarbonate.

We took the award-winning base of the Prusa MK3S+, and added a host of features and improvements, so you can print faster and longer, without needing maintenance. The biggest design improvement was switching the extruder to the BondTech dual drive extruder, and high quality Slice Engineering parts.

Features of the ThinkRobotics MK3S+

BondTech Extruder

Slice Engineering Hotends

Super P.I.N.D.A. Probe

A lightweight high-resolution extruder upgrade for the popular Prusa I3 MK3S 3D printers, featuring an optimized design achieved with the help of the community. Hotends that let you print all the way up to 500℃ and up to 30% faster, and your printer will never experience Heat Creep or Jamming
SuperPINDA probe features a hiqh-quality sensor for a fully-automatic Mesh Bed Leveling process. This probe helps your printer create a virtual height map of the print bed, resulting in exceptional first layer.

 

We offer 3 different variants of the printer, for someone getting started with 3D printing to a seasoned DIY 3D printer. If you have specific requirements for 3d printing, you can contact us for further tweaks to your printer.

Variant 1:

Variant 2:

Variant 3:

The ThinkRobotics MK3S+ printers can print the following materials out of the box (with Vanadium or Hardened Steel Nozzles):

Basic Features

  • Build volume: 25×21×21 cm (9.84"×8.3"×8.3")
  • Layer height: 0.05 - 0.35 mm
  • Nozzle: 0.4mm default, wide range of other diameters/nozzles supported
  • Filament diameter: 1.75 mm
  • Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials.
  • Max travel speed: 200+ mm/s
  • Max nozzle temperature: 300 °C / 572 °F (can be extended to 450 °C as mentioned in the variants above)
  • Max heatbed temperature: 120 °C / 248 °F
  • Extruder: As mentioned above.
  • Print surface: Removable magnetic steel sheets with different surface finishes, heatbed with cold corners compensation
  • Safety features: IR filament sensor, high-quality Delta PSU with Power Panic, 3 thermistors, RPM monitoring
  • LCD Screen: Monochromatic LCD
  • Printer dimensions (without spool): 7 kg, 50×55×40 cm; 19.6×21.6×15.7 in (X×Y×Z)
  • Power consumption: PLA settings: 80W / ABS settings: 120W

* Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

ADVANCED FEATURES

  • Controller: EINSY RAMBo 8-bit board with Trinamic 2130 drivers (256 microstepping),  sensorless homing for X and Y axes
  • Mesh Bed Leveling: Advanced high-quality SuperPINDA sensor (Super Prusa INDuction Autoleveling sensor)
  • Print sheet profiles: Firmware supports print sheet profiles to store Live Z calibration data to enable quick switching between different print sheets.
  • Filament sensor: IR sensor built-in, supports filament auto-loading. Print pauses when filament runs out.
  • Power Panic: Hardware-based, single G-code line accuracy
  • Ethernet connection: via Raspberry Pi (optional) Wi-Fi connection: via Raspberry Pi (optional)
  • Advanced sensors: 3 thermistors including High Temperature Thermistor for the hotend, fans RPM monitoring, SuperPINDA
  • Calibration: Automatic, Mesh Bed Leveling, SelfTest
  • Print medium: SD card (16 GB card included)
  • Firmware update: via PC (USB cable)
  • PSU: Custom-made Delta PSU with hardware-based power panic
  • Advanced features: Automatic filament loading, steel sheet profiles, Octoprint compatibility and more

Secure Checkout

We are PCI-DSS compliant and use 256 bit SSL encryption.

Instant Dispatch

99% of our orders are shipped within 24 hours.

Bulk Orders

Use the contact form for bulk order quotes.

Call us (Weekdays)

+91 93183 94903
Airtel Money Amazon American Express Diners Club Freecharge Google Pay Maestro Mastercard MobiKwik Ola Money PayPal Paytm RuPay Visa