Precision Carbon Fiber Pultruded Hollow TubeSKU: MEC5601
Size3.0mm (OD) X 1.5mm (ID) X 1000mm (L) 4.0mm (OD) X 2.0mm (ID) X 1000mm (L) 5.0mm (OD) X 3.0mm (ID) X 1000mm (L) 6.0mm (OD) X 4.0mm (ID) X 500mm (L) 10.0mm (OD) X 8.0mm (ID) X 1000mm (L) 12.0mm (OD) X 10.0mm (ID) X 1000mm (L) 20.0mm (OD) X 16.0mm (ID) X 1000mm (L) 40.0mm (OD) X 36.0mm (ID) X 800mm (L)
Carbon Fiber Pultruded Tubes are manufactured by pulling continuous carbon fibers combined with a resin matrix through a heated steel forming die. This process is referred to as pultrusion and is used for producing continuous lengths of composite materials with constant cross-sections.
As the carbon fibers are saturated with the resin mixture and then pulled through a die, the hardening of the resin is initiated by the heat from the die and a rigid, cured tube is formed in the shape and size of the die. The majority of the fibers are running in the 0 degree direction, along the length of the tube, to produce an extremely stiff and lightweight tube with a very low coefficient of expansion. This type of construction offers a high stiffness to weight ratio tube with incredible linear strength, due to the orientation of the carbon fibers, and tight outer diameter (OD) tolerances.
Our Pultruded Carbon Fiber Tubes have a matte finish surface and are covered with a light glass scrim to improve structural integrity of the tube.
- Aerospace Spars & Beams
- UAV Housing Components
- Frames & Supports
- Structural Components
- Interior Design
- Automation Equipment
- Recreational Equipment