eSun eVacuum Kit

SKU: 3D8013
₹ 999.99 ₹ 1,499.99 -34% OFF

eSun eVacuum Kit

SKU: 3D8013
₹ 999.99 ₹ 1,499.99 -34% OFF

Inclusive of 18% GST

Products will be delivered between 1 and 5.

Description Reviews

The 3D printing filament vacuum kit is a novel portable household vacuum device for vacuum storage of filaments, especially for some with high water absorption rate, such as PVA, ePA, ePA-CF, ePA-GF, ABSMAX, TPU-95A, etc. When your filaments are opened and not used up, in order to prevent them from absorbing water and affecting the print quality, you can use this kit to save your filaments. The vacuum kit can be used together with eBOX to achieve the best printing results for filaments.

The kit has passed BPA-FREE and FDA certification, food-grade materials, safe and environmentally friendly.

Filament is not included, pictures are for illustration only.

Accessories:

Air pump x1

Vacuum bag x10

Humidity indicator card x15

Size: 16.5x3.5x3.5cm

Weight: 50g

Material: ABS+ silicone

Air suction: ≥8L/min

Size: 30x34cm

Material: PA+PE, certified by BPA and FDA

Thickness: 0.085mm

Storage temperature: -20 to 85℃

Environmentally friendly cobalt-free humidity indicator card, indicating range 10%~60%.

When the humidity in the environment around the humidity indicator card rises to a certain value, the corresponding indicator point on the indicator card will change from brown to light blue.

When the indicator point becomes gray (between brown and light blue), the value in the indicator point is the current ambient humidity.

Others: sealing clip x2, desiccant x15

Note: When the humidity reaches 50%, it is recommended to replace the desiccant.

Store in a dry, cool environment; avoid direct sunlight and water.

The humidity card can be reused after drying in an oven or hot air.

 

Product advantages:

1. The vacuum bag adopts double seal design, single-sided embossing treatment, good sealing performance, can achieve the best moisture-proof effect, and saves time and effort when pumping air

2. The vacuum bag is made of BPA-FREE and FDA-certified food-grade PE+PA composite material, strong and durable, recyclable, safe and environmentally friendly

3. The vacuum bag is specially designed for 3D printing filament, which can be adapted to 0.5KG/0.75KG/1KG package of 1.75mm/2.85mm/3mm filaments

4. The humidity card has high sensitivity and can be used repeatedly, so you can know the dry and humidity of filaments at any time


No.

Intro

Features

Advantage

Benefit

1

Basic intro

 Double seal design

Better sealing

Moisture-proof and dust-proof to ensure the printing quality of filaments

2

 Humidity card indication

 High sensitivity, reusable, easy to observe

Know the dry and humidity conditions of filaments at any time

3

The right size

Wide applicability

Can be adapted to 0.5KG/0.75KG/1KG  package of 1.75mm/2.85mm/3mm filaments

4

Additional intro

Single side embossing treatment

Easily transformed

Save time and effort when pumping

5

PE+PA composite material

Strong and sturdy

Recyclable, saving and environmental protection

6

BPA-FREE and FDA certificated

Food grade

Safe and environmentally friendly

 

Instructions for use:

  1. Put the 3D filaments, humidity indicator card and desiccant into the vacuum bag
  2. Exhaust the air as much as possible by hand, and then seal the bag with a sealing clip
  3. Use the suction pump to aim at the air valve, draw out the gas, apply the valve once by hand, and flatten the plastic
  4. Store in a dry and cool environment

Instruction Video - eVacuum Kit

    Customer Reviews

    Based on 1 review Write a review

    Secure Checkout

    We are PCI-DSS compliant and use 256 bit SSL encryption.

    Instant Dispatch

    99% of our orders are shipped within 24 hours.

    Bulk Orders

    Use the contact form for bulk order quotes.

    Call us (Weekdays)

    +91 93183 94903
    Airtel Money Amazon American Express Diners Club Freecharge Google Pay Maestro Mastercard MobiKwik Ola Money PayPal Paytm RuPay Visa