The A3967 is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the A3967). A3967 requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The A3967 has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! A3967 drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min/max adjustment. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.
Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.
A3967 microstepping driver
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 750mA/phase
Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds
Do not buy their products. They are just trying to sell cheap Chinese products which seldom work. No ethics either.
Dear Mr Singh,
As already informed over email to you, these batteries are not drone batteries. These are regular LiPo batteries with a maximum discharge current of 2C, and charge current of 1C. Using them on drones cause irreversible damage to the battery.
Drone batteries have a high discharge rating, and can be found on our store. I am not sure how use of a product beyond its scope by the customer makes our company unethical. Good Luck with your future endeavours.