Transmitters and Telemetry

The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. It also has frequency memory, so when you power down it will save the last frequency channel you were using. Powering the receiver at the field is as easy as plugging in a 3 cell lipo into the included prewired cable with mini JST. It just doesn’t get any simpler than this. The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at 21g, it’s perfect for a wide range of aircraft! Note: This is the new 48-channel edition of the 5.8Ghz 600mW AV Wireless System 48 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compactable; Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching; Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received; Power off memory: Replay the very last frequency band and channel Independent video and audio signal outputs Specifications TX TS832 specs: Power input: 7.4-16V (3S Lipo suggested) Transmitting power: 600mA Antenna gain: 2db Working current: 220mA at 12V Video bandwidth: 8M Audio bandwidth : 6.5M Weight: 22g Dimension: 54x 32x 10mm(excluding antenna) RX RC832 Specs: Power input: 12V Working current: 200mA max Antenna impedance: 50 Antenna gain: 2db Video impedance: 75 Video format: NTSC/PAL auto Dimension: 80x 65 x15mm Weight: 85g Resources Datasheet Tutorials

The APM2.5 UBlox NEO-M8N GPS Module GYGPSV1-8M is optimized for cost-sensitive applications, while NEO-M8N/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The futureproof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications. The NEO-M8 series of concurrent GNSS modules are built on the high performing u-Blox M8 GNSS engine in the industry proven NEO form factor.NEO-M8N provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEOM8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications. Specifications Receiver type 72-channel M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C Nav. update rate1 Single GNSS: up to 18 HZ Concurrent GNSS: up to 10 Hz Position accuracy2 2.0 m CEP Acquisition2 Cold starts: 26 s Aided starts: 2 s Reacquisition: 1.5 s Sensitivity2 Tracking & Nav: -167 dBm Cold starts: -148 dBm Hot starts: -156 dBm Assistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days)3 AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant Supply voltage 1.65 V to 3.6 V 2.7 V to 3.6 V Power consumption4 23 mA @ 3.0 V (continuous) 5 mA @ 3.0 V Power Save Mode (1 Hz, GPS mode only) Backup Supply 1.4 to 3.6 V Concurrent GNSS LCC Module, TCXO, flash, SAW, LNA, Timepulse Configurable 0.25 Hz to 10 MHz Resources Datasheet Tutorial

The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. It also has frequency memory, so when you power down it will save the last frequency channel you were using. Powering the receiver at the field is as easy as plugging in a 3 cell lipo into the included prewired cable with mini JST. It just doesn’t get any simpler than this. Note: This is the new 48-channel edition of the 5.8Ghz 600mW AV Wireless System 48 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compactable; Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching; Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received; Power off memory: Replay the very last frequency band and channel Independent video and audio signal outputs Specifications RX RC832 Specs: Power input: 12V Working current: 200mA max Antenna impedance: 50 Antenna gain: 2db Video impedance: 75 Video format: NTSC/PAL auto Dimension: 80x 65 x15mm Weight: 85g Resources Datasheet Tutorials

The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at 21g, it’s perfect for a wide range of aircraft! Note: This is the new 48-channel edition of the 5.8Ghz 600mW AV Wireless System 48 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compactable; Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching; Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received; Power off memory: Replay the very last frequency band and channel Independent video and audio signal outputs Specifications TX TS832 specs: Power input: 7.4-16V (3S Lipo suggested) Transmitting power: 600mA Antenna gain: 2db Working current: 220mA at 12V Video bandwidth: 8M Audio bandwidth : 6.5M Weight: 22g Dimension: 54x 32x 10mm(excluding antenna) Resources Datasheet Tutorials

This is the high performance GPS module with HMC5883L compass. It can be mounted away from sources of interference. It features active circuitry for the ceramic patch antenna, rechargeable backup Capacitors for warm starts. 7M GPS module 10Hz update rate Build in 25 x 25 x 4mm ceramic patch antenna LNA and SAW chip 3.3V LDO low noise regulator UART (TTL) port with EMI protection 3V Rechargeable Backup Capacitors Fix indicator LEDs Reverse polarity protection for input power Specifications Default parameterNMEA protocolBaud rate : 9600Nav rate : 1HzTIMEPULSE (fix LED) rate : 1HzDimension: 53*14mmCable Length:215mmNet Weight: 32g (include cable) Resources Datasheet Tutorial  

5.8 GHz suit for transmitter and receiver Universal usage for all FPV equipment, like fpv googles, fpv transmitters and receivers, fpv monitors, quadcopters, multicopters, drones, etc. Compact size, light weight. Omnidirectional, high efficiency. Specifications Brand name: OCDAYConnector: SMA, RP-SMAFrequency Range:5.8GHzColor: Blue, RedModel Type:4-leaf AntennaSWR: Less than 1.5Gain: 3dbiOmnidirectional, high efficiencySize: (DxH)28x86mm/1.1x3.4inchPackage size: 88x162x30mmWeight: 11gPackage weight: 15g Resources Datasheet Tutorial