Soldering Equipment

Product features: Uses latest anti-static design with double-sided board Imported heating element with great power, high stability, and rapid heating for desoldering in under a minute Thermostat circuit with temperature adjustable range between 200 - 450°C (392 - 842°F) Soldering iron tip compatibility with 900M series 70% lower power consumption compared to ordinary soldering irons Silicon tube handle is comfortable and resistant to high temperatures Anti-twist on tail line to further improve safety Specifications: Soldering iron length: 2.5 inches (6.5 cm) Cable Length: 57 inches (145 cm) Soldering iron pen length: 8.3 inches (21 cm) Power: 60W Tutorial

10cc Syringe BGA SMD Solder Soldering Paste Flux Grease RMA-223 Specifications: The RMA-223 is a high viscosity no-clean flux , it can be used for PCB, BGA, PGA reworking, it can be used for soldering and reballing of computer and phone chips. It is the mixture of high-quality alloyed powder and resin pasty flux, it can avoid the pale yellow residue, so u are easy to clean the board. Joint high intensity. Good Immersion. Flux Type: RMA-223 Volume: 10ml/ 10cc Length: Approx. 9.5cm/ 3.74" Tutorial

Product Features: Short welding time Material: Sn99.3 Cu0.7 Flux content: 2 % Wire diameter: 0.8 mm Melting point: 227 ° C Weight: Approx. 50g Tutorial

Product features: Uses latest anti-static design with double-sided board Imported heating element with great power, high stability, and rapid heating for desoldering in under a minute Thermostat circuit with temperature adjustable range between 200 - 450°C (392 - 842°F) Soldering iron tip compatibility with 900M series 70% lower power consumption compared to ordinary soldering irons Silicon tube handle is comfortable and resistant to high temperatures Anti-twist on tail line to further improve safety   Specifications: Soldering iron length: 2.5 inches (6.5 cm) Cable Length: 57 inches (145 cm) Soldering iron pen length: 8.3 inches (21 cm) Power: 80W Package includes: 1x Temperature adjustable 80W soldering iron 5x Soldering iron tips (I K B 3C 1.6D) 1x Metal Soldering stand 1x Fine tip tweezers (curved) 1x 0.6mm Soldering wire (15 grams) 1x Desoldering Pump 1x Wire Stripper Tutorial

PHONEFIX Green UV Light-Cured BGA Solder Mask with Flexible Syringe Plunger and Dispenser Needles for Phone PCB Motherboard Soldering   This UV Solder Resist is used to protect PCB traces from corrosion You can also add out UV Curing (USB rechargeable) torch with the solder mask.

951 Flux-Pen is a zero-halogen, non-rosin Flux-Pen that is specifically designed for rework of conventional and surface mount circuit board assemblies. The extremely low solids content (2.0%) and nature of the activator system results in practically no residue left on the assembly after soldering. There are no residues to interfere with electrical testing. 951 exhibits improved soldering performance to minimize solder bridges (shorts) during rework operations. This flux is suitable for automotive, computer, telecommunications and other applications where reliability considerations are critical. The surface insulation resistance on soldered boards is higher than that provided by typical water-soluble fluxes. 951 contains a corrosion inhibitor such that no corrosion products are formed when bare copper surfaces are exposed to humid environments. Specification: Name: Flux Pen Condition: Brand New From Factory Model: #951 Capacity: 10ml Features: Easy application of flux with pen-like brush It is excellent in workability and easy to carry. Flux replenishment can be done repeatedly. Flux vaporization is stopped to keep density constant. Dripping is prevented because of proper flow adjustment mechanism. It can be used as cleaning brush when charged with alcohol. The body is transparent and remaining amount can be known at a glance   Main Application : Solar Cells Soldering;  PCB and Circuit Board Welding;  Electronics Maintenance; Other areas that require soldering and weldering protection.   Usage: Before welding, flux coated on the base material (to improve wettability) Adoption of amendments to the object when the applied flux, oxidation can remove wax and improve infiltration. Use alcohol to clean the substrate (prohibiting the use other organic solvents)

The GM320 Non-Contact Laser LCD Display Digital Infrared(IR) Thermometer is used to measure the temperature of hot bodies which are generally hard to reach. This Infrared Temperature Gun is very safe to use in the temperature range of -50°C to 330°C. The Module is very popular because of its useful features like very handy, easy to use, fast response etc. While using this GM320 Non-Contact Laser LCD Display Digital Infrared(IR) Thermometer just point temperature meter gun towards the object which you want to know the temperature and click the button(make sure that the Laser light is following right on the object) and you are done. The temperature meter gun will display the accurate temperature of the body on LCD Display. It’s suitable for hot water pipes, hot engine parts, cooking surfaces, hot tubes insulation, electrical connection, ballasts in electric lights, electric motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks, hot & cold food products, heating air conditioning, etc. Features Precise non-contact IR thermometer, safe and easy to use. Simply point to an object and read its temperature. Laser sight allows for accurate targeting. Consist of optics, temperature sensor, signal amplifier, a processing circuit and LCD display. Laser on/off switch, Auto power off & temperature data hold. 20 seconds auto power off. Celsius and Fahrenheit switchable. Simple One-Handed operation Lightweight and compact. Batteries are not included Specifications Resources Datasheet Tutorial

1.5m spool - Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up. Braid Width: 2.5mm Length: 1.5m (5 ft) Package Contains - 1 roll Tutorial

Solder is a fusible metal alloy used to create a permanent bond between metal workpieces. Solder is melted in order to adhere to and connect the pieces after cooling, which requires that an alloy suitable for use as solder have a lower melting point than the pieces being joined. The solder should also be resistant to oxidative and corrosive effects that would degrade the joint over time. Solder used in making electrical connections also needs to have favorable electrical characteristics.

Useful in cleaning up mistakes or removing excessive solder, every electrical engineer has one of these on their desk. To use, depress the end to engage the vacuum. Then heat up the to-be-desoldered joint until it is liquid. With your other hand hold the plastic tip as close as possible to the joint and depress the button to suck up all the liquid solder. If necessary, clean up the remaining solder with wick. All metal construction is ideal for heavy use including production re-work and repair. Large capacity spring-loaded plunger quickly removes solder in a single action. Tool easily disassembles for fast cleaning, tip and "O" ring replacement. Internal plunger pin automatically purges solder from tip with each use. Length: ~19cm Tutorial

Parameter Model 929D-II929D-II Power 18W (Max. 130W) Temperature Range 90~480℃ How to adjust temperature +/- buttons Display LED display Power on/off Switch Yes Features: Quick Heating UpThe heating elements and heating system feature improved design, enabling the heat to quickly conduct to the soldering tips. This significantly improves the soldering efficiency. Built-in Feeder Driven by an electric motor, the continuous solder feeding can be carried out only when pressing the button. The feeding will immediately stop after loosing the button. PID Temperature ControllerEquipped with the PID temperature controller, the temperature tracking and adjustment can be made in a timely manner, ensuring the temperature always keeps constant. Intelligent Control & Reliable Design In addition to intelligent heat control, °C/°F display can be freely switched (only for 929D-II). The soldering and rework station features 10-minuite Sleep Mode, digital calibration, On-Off switch, and easy-to-replace Solder Roll.  

Rigid metal structure with stabilizing rubber pad offers the perfect, most stable platform for your projects. The 2 adjustable grip retractable stand accommodates various board sizes up to 200mm width and 4 different thicknesses. The clamps allow 360 degrees rotation and can be secured in any position, make your soldering projects more easy and efficient. Lightweight design, easy to carry.   Item Specification Materials:ABS arm + metal base Max. circuit board size: 20cm x 14 cm Circuit board thick: 1.2mm / 1.8mm / 2.0mm / 3.0mm Dimensions:30 x 16.5 x 12.5 cm Weight: 450 g Individual packing:Color Box

Feature This hot air rework station features a PID programmable temperature control system and real time temperature tracking of each component, as well as an automatic temperature correction with rapid speed compensation and minimum tolerance. It comes equipped with a hot air gun and soldering iron. The anti-static design prevents static or electricity leakage. Personalized Functions: A. Temperature Correction Function: The rework station will automatically correct the temperature due to environmental changes or replacement of the heating coil, soldering iron or other components. B. Sleep Mode: The soldering iron automatically goes to sleep if it is left in a still condition for 10 minutes, and the temperature will decrease to 200℃. This prevents the iron tip from oxidizing and other damage, as well as eliminates the need for a heat waiting period. Activation Method: a). Shake the iron handle several times. b). Press any button once. C). Power-off first and then power-on. C. Cold/Hot Air Switch:Switch from cold or hot air by pressing the button-the cold air function is especially designed to cool down heated elements processing. Parameter Machine Rated Voltage AC 220V±10% 50Hz Machine Power 700W Working Environment 0~40℃ Relative humidity< 80% Storage Temperature -20~80℃ Relative humidity< 80% Machine Size 13.5*15*10cm Weight 2.6KG Parts Item Hot air gun Soldering iron Working Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output Power 650W 50W Temperature Range 100℃ ~ 480℃ 200℃ ~ 480℃ Mode of Airflow Brushless fan --- Airflow 120L/min (max.) --- Temperature Stability ±5℃ (static) ±5℃ (static) Display LED (red/green) LED (red/green) Temperature Correction PID digital program proofreading ---- PID Temperature Cycle Fast 200ms Fast 200ms Heater Ceramics heater Common metal heater Tips to Ground Impedance --- < 2Ω Tips Voltage to Ground --- < 2mV Standard Configuration Machine: 1set User manual: 1pc Air gun handle: 1pc Nozzles: 3pcs (10mm, 8mm, 5mm) IC Puller: 1pc Power plug: 1pc Iron handle (including a heater and tips): 1pc Iron holder: 1pc

Specifications: Weight: 103g Size: 113mm X 78mm X 35mm / 4.4 X 3.1 X 1.4in Material: Iron

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces.A soldering iron is composed of a heated metal tip and an insulated handle. Heating is often achieved electrically, by passing an electric current (supplied through an electrical cord or battery cables) through a resistive heating element Solder melts at approximately 185°C (365°F). Soldering irons are designed to reach a temperature range of 200°-480°C (392°-896° F).Soldering irons are most often used for installation, repairs, and limited production work in electronics assembly. High-volume production lines use other soldering methods.[1] Large irons may be used for soldering joints in sheet metal objects. Less common uses include pyrography (burning designs into wood) and plastic welding. Tutorial