Skip to content
Join our telegram channel, click this bar now!
Join our telegram channel, click this bar now!

Large Metal Servo (Power HD 1501MG)

Save 38%
Original price ₹ 3,200.00
Current price ₹ 1,995.00
SKU MOT4001

The 1501 MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larger servos. This is one of our most popular standard-size servos. Servo horns and associated hardware are included.

The HD-1501 MG is a powerful standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for such a high-speed servo. The 1501 MG works with standard RC servo pulses, providing a running angle of approximately 165° over a servo pulse range of 800 µs to 2200 µs, and it has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.

The default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far you could break your servo!

NOTE: Operating servos close to or at stall torque reduces their life and will permanently damage them beyond repair.

 

  • Weight: 63g
  • Dimension: 40.7mm X 20.5mm X 39.5mm
  • Stall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)
  • Operating Speed: 0.16sec/60degree (4.8V); 0.14sec/60degree (6.0V)
  • Operating Voltage: 4.8V ~ 6.6V
  • Bearing Type: Ball Bearing x 2
  • Motor Type: DC Motor
  • Gear Type: CopperTemperature Range: -20℃ - +60℃
  • Working Frequency:1520μs / 50Hz
  • Servo Wire Length: 32cm
  • Current Draw at idle: 10mA
  • No Load Operating Current: 170mA
  • Stall Current: 1.2A
  • Servo Arms and Screws included
Specifications

Resources

Datasheet

Library 

Sample Code

Tutorial

 

×
Welcome Newcomer