sale
DSO138 Digital Oscilloscope with 2.4 DSO138 Digital Oscilloscope with 2.4
DSO138 Digital Oscilloscope with 2.4 "TFT screen with Acrylic Case (optional) from ₹ 2,599.99 ₹ 2,600.00
Details: Material: Acrylic Product weight: 156 g / 5.52 oz Power Input: DC 9V(Power adapter is not included) Maximum real-time sampling rate: 1Msps Accuracy: 12Bit Sampling buffer depth: 1024 bytes Analog bandwidth: 0 -200KHz Vertical Sensitivity: 10mV/Div -5V/Div (1-2-5 progressive manner) Adjustable vertical displacement, and with instructions Input impedance: 1MΩ Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe) Coupling modes include DC/AC/GND The horizontal time base range: 10μs/Div - 50s/Div (1-2-5 progressive manner) Features: With automatic, regular and one-shot mode,easy to capture the moment waveform Available rising or falling edge trigger Adjustable trigger level position,and with instructions Observable trigger waveform before (negative delay) Can freeze at any time waveform display (HOLD function) Comes 1Hz /3.3V square wave test signal source Specifications Resources Datasheet Tutorial
-3% sale
PCB Ruler v2 - 6 PCB Ruler v2 - 6
PCB Ruler v2 - 6" ₹ 189.99 ₹ 195.00
If you solder surface mount components for the first time, you might be surprised: "How small these patch devices are!" They also have many different names! QFN, TDFN, SOIC, SOP, J-Lead, what do these things mean, and how can you tell how big they are? ThinkRobotics offers you a way to handle all of that and much more - a board that you can use as a reference. This is a handy, stylish PCB reference ruler. Measuring approximately 25.4mm x 152.4mm, with standard thickness of FR4, this gold-plated ruler is engraved with the most common component packages often encountered. It also has a font size description, a trace width chart, and a set of American Wire Gauge (AWG) drill sizes so you can measure the thickness of your traces at work. Material: PCB Common line width size reference (unit: mil) 8, 10, 15, 20, 25, 30, 40 Commonly used drilling diameter reference size (unit: mm) 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 commonly used resistor-capacitor chip package: 0402, 0603, 0805, 1206, 1210; Common MOS, inverter, and triode packages: SOT23, SOT89, SOT25,SOT23-6, SOT223S, SOT254P-6, TO-252; Commonly used buttons SW-2, SW-4, miniusb, micro usb, crystal oscillator SM49, TC26, exclusion RES4, Device and IC pin spacing comparison table: 0.5mm, 0.8mm, 1.0mm; As many as possible include most of the chip IC package formats: TQFP48, TQFP100, TQFP144, SOP20, SOP20_W, SSOP28, SOP8, SOP14, SOP16, SOP8-W, PLCC28, PLCC44, TSOP48, TSSOP24, QFN-16 , BGA100;
sale
Digital Protractor Digital Protractor
Digital Protractor from ₹ 1,529.99 ₹ 2,500.00
This angle finder ruler could both measure angle and length, metric and imperial scale. Useful for calculating angles quickly and accurately.  Resolution: 0.1° Accuracy: 0.3° Working temperature: 0~50℃ Working humidity: ≤85%RH Battery: CR2032 3V lithium battery (INCLUDED) Color Sent is at the discretion of ThinkRobotics. Tutorial
-51% sale
Digital Caliper (Electronic Vernier Caliper) - ThinkRobotics.in Digital Caliper (Electronic Vernier Caliper) - ThinkRobotics.in
High Precision Digital Caliper (Electronic Vernier Caliper) ₹ 1,249.99 ₹ 2,499.99
  These high quality digital calipers offer 0.02mm accuracy and a resolution of 0.01mm. Fine polished stainless steel and NEW processing of depthometer's groove give better looking, smooth sliding, and accurate result.    Measuring Range: 0-150mm / 0-6in. Resolution:0.01mm / 0.0005in. Accuracy: ± 0.02mm / 0.001in. (<100mm); ± 0.03mm / 0.001in. (>100mm) Repeatability: 0.01mm/0.0005in. Max. Measuring Speed: 1.5 m/sec., 60 in./sec. Measuring System: Linear Capacitive Measuring System Display: LCD Power: LR44 (1.5V / 180mAh) Working Temperature: 5℃ - 40 ℃ (Accuracy affected in environments exceeding 80% relative humidity) NOTE: Slider can be moved only after the locking screw is loosened.  Specifications Resources Datasheet Tutorial
-36% sale
DSO328 Digital oscilloscope with 2.4 DSO328 Digital oscilloscope with 2.4
DSO328 Digital oscilloscope with 2.4 "TFT screen Atmega328p ₹ 4,199.99 ₹ 6,525.00
Overview: This mini oscilloscope is designed for electronic hobbyists to learn about electronics, soldering, programming and STM32. It contains main controller board, TFT LCD and other electronic components to DIY a functional mini digital oscilloscope.   Features: Use STM32 Chip. It runs faster than DSO138 and a good handle of data. Pre-programmed. The controller board is programmed and tested before leaving factory. It is high quality and safe to use. Full of Fun. It is a DIY kit and fun to make your own oscilloscope. Especially suitable for who are interested in soldering and STM32. With Cool Black Case. Unlike DSO138, this DS0311 is with a cook black case, which makes it convenient to use in teaching and testing. Notice: This oscilloscope requires DC 9V 200mA power supply (no more than 10V, or it may be burned)     Specification: Input impedance: 1MΩ Analog Bandwidth: 0 - 200 KHz Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe) Maximum real-time sampling rate: 1Msps Comes 1Hz /3.3V square wave test signal source Accuracy: 12Bit Sampling buffer depth: 1024 bytes Vertical Sensitivity: 5mV/Div - 20V/Div Adjustable vertical displacement, and with instructions Coupling modes: DC / AC / GND

Secure Checkout

We are PCI-DSS compliant and use 256 bit SSL encryption.

Instant Dispatch

99% of our orders are shipped within 24 hours.

Bulk Orders

Use the contact form for bulk order quotes.

Call us (Weekdays)

+91 93183 94903
Airtel Money Amazon American Express Diners Club Freecharge Google Pay Maestro Mastercard MobiKwik Ola Money PayPal Paytm RuPay Visa