Magigoo - High Quality 3D Printing Adhesive

All you need for sure adhesion of 3D prints. Magigoo is an easy-to-use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn't it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30-hour print complete without any warping and having it release easily once cooled. Features Over 100 applications ABS, PLA, PETG, HIPS, ASA, TPU Easy application Easy release Easy clean No smell Non-toxic No additional tools needed Easy to transport Nicer print finish

Nano Polymer Adhesive Bed Prep This is a world-class bed prep Nano Polymer Adhesive designed for use while printing high-temp polymers but it also works great for engineering and general purpose grades.  Apply on the entire build surface or just in problem areas to cure lift.   Product attributes include: High-temp resistant for printing PEKK, PEEK, PPSU, PSU, PPS, and Ultem™ PEI Excellent adhesion to more common materials including PC, PC/ABS, ABS, ASA, PLA, PETG, NYLON, TPU, etc…   Made from non-toxic organic compounds Easy to clean and reapply Adheres well to many build surfaces, including borosilicate glass, ceramic glass, PCB board, Carbon Fiber, Fiberglass, Aluminum, BuildTak™, PEI, and more. Package includes a 120ml bottle of Nano Polymer Adhesive and applicator brush. Instructions for use: Clean build surface with water/soap, windex, alcohol Apply adhesive evenly on build surface Print part Remove part – instructions below. Part removal: Low temp materials (under 300°C):  When you’re extruding below 300ºC, generally you can remove the part as soon as the plate cools. With materials like PLA or PETG, it usually pops itself off the plate. If it sticks too much, you can apply water around the base of the part, which will help it release. Tech Tip for Using ABS on Glass:  ABS contracts very quickly when it cools; because of this, the risk of chipping, chunking, or breaking glass is higher with ABS. We recommend using Kapton Tape, PEI, or some other type of protective surface on top of glass and then applying this adhesive when printing ABS. High temp materials (over 300°C):  When you’re extruding over 300ºC, remove the part as quickly as possible. You want the buildplate and part to be HOT when you remove it.  We have seen many high-temp materials contract very quickly when cooling causing the glass to break in a very short period of time.

Magigoo Pro PA is designed for professional use, to work exclusively withPolyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. Magigoo Pro PA PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry, there are 3 main types of PA which include PA12, PA66, and PA6. Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally, nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance, and thermal resistance and are widely sought in various industrial applications. Nylon filaments prove to be challenging materials for FDM printing due to their loweradhesion to conventional 3D-printing build surfaces and their higher tendency to warp.Furthermore, there are several classes of PA filaments each behaving differently. Magigoo Pro PA  is a specialized solution for FDM printing of PA filaments which wasdeveloped to work with a wide number of PA types

Magigoo Pro PP is designed for professional use, to work exclusively with Polyporepylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed. Magigoo Polypropylene Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure which makes it chemical resistant and thus ideal for use in food packaging and medical equipment. It is in fact well known in the adhesive industry that it is difficult to adhere polyolefin materials to other types of materials. This combined with the partial crystallinity makes it an especially hard material to print with. Magigoo Pro PP solves this issue and provides additional convenience for use in FDM 3D Printing.

WHAT: Magigoo Pro-Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY: TPUs, TPEs/TPCs describe a group of polymers that are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result, these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape. Additionally, these materials have very good thermal properties, material stability, chemical resistance, and are more cost-effective to produce. As a result, these materials are highly sought in industrial applications. Some flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro-Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro-Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required. How HOW: Magigoo Pro-Flex has been designed and tested to work with different flexible filament brands. Shake the bottle. Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed. Print according to the filament/printer manufacturers recommendations Allow to cool and Remove. The print should pop right off Clean - Use a damp cloth to wipe off. Safety & Tips SAFETY: Using this product with other than Flexible type filaments might cause over adhesion and damage your build surface. Tips: For larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended. In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.

Magigoo Pro PC is designed to work exclusively with Polycarbonate type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down. Magigoo Pro PC The strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end-use part, nonetheless, the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high-temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater to the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (<130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive. Magigoo Pro PC can be used on glass or a multitude of other surfaces. Use on other plastic-based surfaces, including sheets is recommended to provide strong adhesion and preventing the part from fusing to the sheet.

Magigoo Pro adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off. CONTENT: Magigoo Pro PA is designed for professional use, to work exclusively with Polyamide filaments. Designed and tested to work with different PA (nylon) and fiber-reinforced filament brands. Magigoo Pro PC is designed to work exclusively with polycarbonate type filaments and fiber-reinforced variations. Magigoo Pro-PP is designed to work exclusively with polypropylene filaments Magigoo Original is designed to work with a variety of filaments including most PLA, ABS, HIPS, PETG, TPU types of filaments.  HOW:   Shake the bottle. Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed. Print according to the filament/printer manufacturers’ recommendations Allow to cool and Remove. The print should pop right off Clean using a damp cloth (with water) to wipe off.  Safety & Tips SAFETY: These products are for professional use. Please read the instructions carefully before use. Using this product with other than designated type filaments might cause over adhesion and damage your build surface.  Some products may have corrosive and eye irritation substances. Wash your hands after use. Ideally use rubber gloves. Read Safety Data Sheets or consult with the manufacturer if necessary. The bottle applicator has a spring valve inside. In order to activate it, press the nib against the build plate firmly. When pressing bottle sides, make sure the applicator is not going to pop out.  TIPS: For larger prints, a 20 mm brim is recommended In cases of excess adhesion, it is recommended to wet the print bed with a small amount of water slowly working it below the part, this should make part removal easier.

Apply Magigoo Adhesives with a Single Swipe Due to supply constraints, current shipping time is 3-4 weeks. First layer build-plate adhesives are required to mitigate the warping effect in the FDM printing process of commodity and engineering grade thermoplastic filaments. If your AM process involves numerous build surfaces in a printing farm set-up or 3D printers with large build surfaces, applying first layer adhesives using glue-stick, pen type or brush-on adhesives simply takes a lot of time and can result in an uneven application. The Magigoo Coater enables you to pump once and spread the layer with Silicone Roller in a quick, convenient, and reliable manner on your FDM printing surface. The Starter Kit includes everything you need.  The Coater 250ml Magigoo Original Cleaning Kit Spare parts for maintenance User Manual STL files for printing hooks and stand for the Coater for storage  

WHAT: Magigoo Pro HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.  WHY: High-temperature materials such as PEEK are advanced engineering thermoplastics that offer improved mechanical and chemical stability at elevated temperatures when compared to regular thermoplastics. Other materials include PEKK, Ultem, and PPSU and their carbon/glass fiber reinforced counterparts. Owing to their high temperature and other exceptional properties these materials are highly sought after in high temperature and high-performance engineering applications such as in the automotive and aerospace industries. Additionally, these materials are also sought after in chemical, petrochemical, medical, and research applications. High-temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high-temperature properties. Magigoo Pro HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures. How HOW: Magigoo Pro HT has been designed and tested to work with a build-plate temperature of 150 °C or lower. Shake the bottle. Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed. Print according to the filament/printer manufacturers recommendations Allow to cool and remove. The print should pop right off Clean - Use a damp cloth to wipe off. Safety & Tips SAFETY: Using this product with other than PEEK filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results. Tips: For larger prints, a 20 mm brim is recommended Magigoo HT was designed for glass surface but also works on high-temperature garolite and other build-surfaces