sale
ESP8266 / ESP32S Wireless WiFi + Bluetooth Module NODEMCU ESP8266 / ESP32S Wireless WiFi + Bluetooth Module NODEMCU
ESP8266 / ESP32S Wireless WiFi + Bluetooth Module NODEMCU from ₹ 299.99 ₹ 595.00
NodeMCU is a low-cost open source IoT platform. It initially included firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which was based on the ESP-12 module. Later, support for the ESP32 32-bit MCU was added. The term "NodeMCU" strictly speaking refers to the firmware rather than the associated development kits Features: High performance-price ratio  Small volume, easily embezzled to other products  Strong function with support LWIP protocol, Freertos  Supports three modes: AP, STA and AP + STA  Compatible with the Lua program, easy to develop Antenna and balun RF are already integrated, power amplifier, low noise amplifiers, filters, and power management module. The complete solution occupies the least amount of printed circuit area.  This board is used with 2.4GHz dual-mode Wi-Fi and Bluetooth chips by low power TSMC 40nm technology, the best power and RF properties, which are safe, reliable and scalable to a variety of applications.    NOTE: We have both ESP8266 and ESP32S available. Specifications Resources Datasheet Sample Code Tutorial
sale
Waveshare Touchscreen for Raspberry Pi 3.5 Waveshare Touchscreen for Raspberry Pi 3.5
Waveshare Clone HDMI Touchscreen for Raspberry Pi from ₹ 3,597.99 ₹ 4,500.00
800x480 hardware resolution, configurable by software (up to 1920x1080)Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers, which works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, speaker connector, supports HDMI audio output.Also supports VGA input (specific cable is required and should be purchased separately) Waveshare 5" Resolution:  800x480  Waveshare 7" Resolution: 800x480  Specifications Resources Datasheets Tutorial
-2% sale
NodeMcu V3 Lua WIFI Internet of Things development board - ThinkRobotics.in NodeMcu V3 Lua WIFI Internet of Things development board - ThinkRobotics.in
NodeMcu V3 Lua WIFI Internet of Things development board ₹ 339.99 ₹ 345.00
Use CH340G repalce CP2102. Open-source, interactive, programmable, low cost, Simple, smart, Wi-Fi enabled For Arduino as IO hardware Advanced API for IO hardware, which can dramatically reduce redundant work to configure and manipulate hardware. Code as for arduino, but interactively in Lua script. Nodejs network style API Event-driven API for network applications That you facilitate the writing code of the developers that runs on a 5mm * 5mm MCU in Nodejs style. It greatly accelerates the process of developing IOT applications. Lower cost WI-FI Less than 3 integrated ESP8266 Wi-Fi MCU and esay for the prototype development kit. Specifications Drive Type Dual high-power H-bridge Power Input(V) 4.5 to 9 Communication Interface Voltage(V) 3.3 Flash size(MB) 4 Operating Temperature (°C) -40 to 125 Transfer Rate(Kbps) 110 to 460800 AD0 1 channel ADC Length (mm) 49 Width (mm) 24.5 Height (mm) 13 Shipment Weight 0.165 kg Shipment Dimensions 6 × 4 × 2 cm Resources Datasheet Sample Code Tutorial  
Sold out -52% sale
SAMD21 M0 Mini 32-Bit ARM Cortex M0 Core for Arduino Zero - ThinkRobotics.in SAMD21 M0 Mini 32-Bit ARM Cortex M0 Core for Arduino Zero - ThinkRobotics.in
SAMD21 M0 Mini 32-Bit ARM Cortex M0 Core for Arduino Zero ₹ 1,059.99 ₹ 2,099.00
The SAMD21 M0-Mini represents a powerful 32-bit extension of the Arduino UNO platform, but with a small size like Micro or Nano. The board is powered by Atmel's SAMD21 MCU and features a 32-bit ARM M0 core. Compatible with Arduino Zero and Arduino M0. The SAMD21 M0-Mini motherboard expands the series by offering higher performance, offers a variety of project opportunities for the device, and is an excellent educational tool for learning 32-bit application development. Zero applications range from smart IoT devices, wearable technology, high-tech automation to crazy robots. The board is supported by Atmel's SAMD21 MCU, which has a 32-bit ARM Cortex® M0 + core. One of its most important features is Atmel's Embedded Debugger (EDBG), which provides a complete debug interface that eliminates the need for additional hardware and significantly improves the ease of software debugging. EDBG also supports a virtual COM port for device and bootloader programming.  Specifications Resources Datasheet Tutorial
Sold out -27% sale
433Mhz Lora SX1278 Long Range RF Wireless Module - ThinkRobotics.in 433Mhz Lora SX1278 Long Range RF Wireless Module - ThinkRobotics.in
433Mhz Lora SX1278 Long Range RF Wireless Module ₹ 439.99 ₹ 599.99
Features: Frequency Range: 433MHz Modulation: FSK/GFSK/MSK/LoRa SPI Data Interface Sensitivity: -136dBm Output Power: +20dBm Data Rate: <300 kbps 127dB dynamic Range RSSI Excellent blocking immunity Preamble detection Automatic RF sense and CAD monitor Built-in bit synchronizer for clock recovery Packet engine up to 256 bytes with CRC Working Temperature: -40°C ~+80°C Build-in temperature sensor Standby current: ≤ 1uA Supply voltage: 1.8~3.6V Specifications Resources Datasheet Library Sample Code Tutorial
Sold out -17% sale
Long distance Wireless Lora Shield v95 for Arduino (868MHz) Long distance Wireless Lora Shield v95 for Arduino (868MHz)
Long distance Wireless Lora Shield v95 for Arduino (868MHz) ₹ 2,499.99 ₹ 2,999.99
The Arduino LoRa Transceiver Shield is a long range Arduino LoRa shield, based on an open-source library. LoRa Shielding allows the user to send data and reach very long distances at very low data rates. It offers ultra-long range spectrum communication with high interference immunity while minimizing current consumption. RFM95W-based LoRa Shield targets professional wireless sensor network applications such as irrigation systems, smart meters, smart cities, smartphone detection, building automation, and so on. Features: Compatible with 3.3v or 5v I/O Arduino Board. Frequency Band: 433MHz / 868 MHZ or 915 MHZ (Pre-configure in factory) Low power consumption Compatible with Arduino Leonardo, Uno, Mega, DUE External Antenna via SMA Jack Alternate for SX1276 Specifications for RFM95W: 168 dB maximum link budget. +20 dBm - 100 mW constant RF output vs. +14 dBm high efficiency PA. Programmable bit rate up to 300 kbps. High sensitivity: down to -148 dBm. Bullet-proof front end: IIP3 = -12.5 dBm. Excellent blocking immunity. Low RX current of 10.3 mA, 200 nA register retention. Fully integrated synthesizer with a resolution of 61 Hz. FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation. Built-in bit synchronizer for clock recovery. Preamble detection. 127 dB Dynamic Range RSSI. Automatic RF Sense and CAD with ultra-fast AFC. Packet engine up to 256 bytes with CRC. Built-in temperature sensor and low battery indicator.
Sold out -11% sale
LoRa32 ESP32 0.96 LoRa32 ESP32 0.96
LoRa32 ESP32 0.96" OLED SD Card 868Mhz ₹ 2,249.99 ₹ 2,499.99
This product is based on the WIFI Kit 32 added IP5306 chip, that is, LoRa remote modem, 433MHz frequency, about -139dBm high sensitivity, +20 dBm power output, high reliability, transmission distance (measured open area communication distance 3.6Km). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development. Features Working voltage: 1.8-3.7v Acceptable current: 10-14mA Transmitting current: 120mA @ + 20dBm, 90mA@+17dBm, 29mA@+13dBm Working frequency: 868MHz Transmitting power: + 20dBm Receiving sensitivity: -139dBm @ LoRa&62.5Khz&SF = 12&146bps -136dBm@LoRa&125Khz&SF=12&293bps -118dBm@LoRa&125Khz&SF = 6&9380bps -123dBm@FSK&5Khz&1.2Kbps Frequency error: +/- 15KHz FIFO space: 64Byte Data rate:1.2K-300Kbps@FSK 0.018K~37.5Kbps@LoRa Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK Interface form: SPI Sleep current:0.2uA@SLEEP 1.5uA@IDLE Working temperature: -40℃-+ 85℃ Digital RSSI function Automatic frequency correction Automatic gain control RF wake-up function Low voltage detection and temperature sensor Fast wake-up and frequency hopping Highly configurable packet handler SMA antenna IP5306
-31% sale
Super Low Power RF LoRa Module SX1276 868MHz Super Low Power RF LoRa Module SX1276 868MHz
Super Low Power RF LoRa Module SX1276 868MHz ₹ 899.99 ₹ 1,299.99
Features: Frequency Range: 868MHz Modulation: FSK/GFSK/MSK/LoRa SPI Data Interface Sensitivity: -139dBm Output Power: +20dBm Data Rate: <300 kbps 127dB dynamic Range RSSI FSK/GFSK , LoRa(Long Range) spread spectrum technique Half-duplex communication Excellent blocking immunity Channel rejection ration(ADJ):56dBm ISM multiband, free of charge with no need to apply for frequencies Optional multi-frequency, multiple transmission rate,can be applied in FDMA and FM technologies Intelligent reset, low voltage monitor, timing wakeup, low-power mode,sleep mode Low power RX current: 12~13 mA 256 Bytes FIFO TX/RX ISSI channel detection Transmission mode:FIFO / direct mode(recommend FIFO packet mode) Configuration:AFC/air wakeup/low power/carrier sense/FEC error correction/AEC encryption   Resources Datasheet Library Sample Code Tutorial
-21% sale
Waveshare SX1262 LoRa HAT for Raspberry Pi Waveshare SX1262 LoRa HAT for Raspberry Pi
Waveshare SX1262 LoRa HAT for Raspberry Pi ₹ 2,399.99 ₹ 2,999.99
Raspberry Pi LoRa HAT based on SX1262, allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc. Developmental Resources at Wiki  Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Onboard CP2102 USB TO UART converter, for serial debugging Brings the UART control interface, for connecting host boards like Arduino/STM32 4x LED indicators, easy to check the module status LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications Customizable communication key which won't be retrieved, greatly improves the security of user data Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter Supports fixed-point transmission, broadcast, signal channel monitor Comes with development resources and manual (examples for Raspberry Pi/STM32) SX1262 LoRa module 74HC125V: voltage level translator CP2102: USB TO UART converter Raspberry Pi GPIO connector: for connecting with Raspberry Pi USB TO UART port UART header: for connecting host boards like STM32/Arduino SMA antenna connector IPEX antenna connector Indicators: RXD/TXD: UART RX/TX indicator AUX: auxiliary indicator PWR: power indicator UART selection jumpers A: control the LoRa module through USB TO UART B: control the LoRa module through Raspberry Pi C: access Raspberry Pi through USB TO UART LoRa mode selection jumpers short M0, short M1: transmission mode short M0, open M1: configuration mode open M0, short M1: WOR mode open M0, open M1: deep sleep mode
-31% sale
LoRa Wireless Stick Lite compatible with LoRaWAN, BLE and Wifi - Heltec Automation (868MHz) LoRa Wireless Stick Lite compatible with LoRaWAN, BLE and Wifi - Heltec Automation (868MHz)
LoRa Wireless Stick Lite compatible with LoRaWAN, BLE and Wifi - Heltec Automation (868MHz) ₹ 1,749.99 ₹ 2,499.99
This is a lite version of Wireless Stick with a ESP32-PICO (dual-core 32-bit MCU + ULP core + Internal 4MB FLASH) processor, LoRa node chip SX1276 (alternate to SX1278 or SX1262) and Micro USB interface with complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.  Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);  Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa; Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing; Support the Arduino development environment; (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available, the serial number can be queried on this page); With good RF circuit design and good low-power design (sleep current ≤ 30uA), it is convenient for IoT application vendors to quickly verify solutions and deploy applications; Useful Links How to install ESP32 Arduino Development Environment - http://www.heltec.cn/wifi_kit_install/ Heltec ESP(ESP32 & ESP8266) framework (the basic of Heltec ESP series products Arduino running environment): https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series Heltec ESP32 library (must work with Heltec ESP framework): https://github.com/HelTecAutomation/Heltec_ESP32 Heltec ESP32 LoRaWAN library (a standard LoRaWAN protocol library provide by Heltec Automation, need a license to active: https://github.com/HelTecAutomation/ESP32_LoRaWAN The schematic diagram of Wireless Stick Lite is restricted technical data, it will become downloadable after purchase.You can learn how to get the schematic diagram through this document: https://heltec-automation-docs.readthedocs.io/en/latest/general/view_limited_technical_data.html.(Didn’t buy this product from our website or from a reseller? You can contact your provider or Email us) Pinout - https://resource.heltec.cn/download/Wireless_Stick_Lite/Wireless_Stick_Lite.pdf FAQ - https://heltec-automation-docs.readthedocs.io/en/latest/esp32/frequently_asked_questions.html
Sold out -34% sale
ESP32-CAM-MB with Antenna - ESP32 Serial to WiFi & Bluetooth Development Board With OV2640 Camera
ESP32-CAM-MB with Antenna - ESP32 Serial to WiFi & Bluetooth Development Board With OV2640 Camera ₹ 999.99 ₹ 1,499.00
The ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals. ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.   ESP32-CAM : The smallest 802.11b/g/n Wi-Fi BT SoC module. Low power 32-bit CPU, can also serve the application processor. Up to 160MHz clock speed, summary computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4MPSRAM. Supports UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash lamp. Support image WiFI upload. Supports TF card. Supports multiple sleep modes. Embedded Lwip and FreeRTOS. Supports STA/AP/STA+AP operation mode. Support Smart Config/AirKiss technology. Support for serial port local and remote firmware upgrades (FOTA). Specifications : Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM. External Storage: micro SD card slotup to 4GB. Camera FPC connector. Support for OV2640 (sold with a board) or OV7670 cameras. Image Format: JPEG(OV2640 support only ), BMP, grayscale. LED flashlight. Expansion: 16x through-holes with UART, SPI, I2C, PWM. Misc: Reset button. Power Supply: 5V via pin header. Power Consumption. Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm. Temperature Range: Operating: -20 ~ 85 ; storage: -40 ~ 90 @ <90%RH. Package Includes : 1x ESP32 CAM WiFi Module. 1x OV2640 Camera Module 2MP. 1x Antenna
-14% sale
LG308 Indoor LoRaWAN Gateway 868Mhz LG308 Indoor LoRaWAN Gateway 868Mhz
LG308 Indoor LoRaWAN Gateway 868Mhz ₹ 25,999.99 ₹ 29,999.99
The LG308 is an open source LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, or Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. The LG308 uses semtech packet forwarder and fully compatible with LoRaWAN protocol. It includes a SX1301 LoRa concentrator + 2 x SX1257, which provide 10 programmable parallel demodulation paths. LG308 has pre-configured standard LoRaWAN frequency bands to use for different countries. User can also customized the frequency bands to use in their own LoRa network. LG308 has optional built-in LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service. Features: Open Source OpenWrt system Managed by Web GUI, SSH via LAN or WiFi Internet connection via LAN, WiFi, Or 3G/4G (via optional LTE module) Emulates 49x LoRa demodulators LoRaWAN Gateway 10 programmable parallel demodulation paths Applications: Smart Buildings & Home Automation Logistics and Supply Chain Management Smart Metering Smart Agriculture Smart Cities Smart Factory LoRa Spec: 1 x SX1301 + 2 x 1257 LoRa Tranceiver  General Specification: 10M/100M RJ45 Ports x 2 1x 2.4G WiFi (802.11 bgn) 1x USB host port 1x Mini-PCIe Interface Power Input: 12v, 1A Documentation: Datasheet User Manual Software Source Code
-17% sale
Waveshare SIM7080G Cellular / GNSS HAT for Raspberry Pi Waveshare SIM7080G Cellular / GNSS HAT for Raspberry Pi
Waveshare SIM7080G Cellular / GNSS HAT for Raspberry Pi ₹ 3,599.99 ₹ 4,299.99
 This is a telecommunication HAT which features multi communication functionalities: NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System). With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards. This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on. Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo) Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Breakout UART control pins, to connect with host boards like Arduino/STM32 Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available) 3x LED indicators, easy to monitor the working status Baudrate: 300~3686400 bps Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) GNSS Specifications Receiver type 16-channel C/A code Bands GNSS L1: 1575.42±1.023MHz GLONASS: 1597.5~1605.8 MHz BeiDou: 1559.05~1563.14 MHz Galileo L1: 1575.42±1.023MHz Update frequency: 1 Hz (default) Data format: NMEA-0183 Antenna: active antenna Other Specifications Power supply voltage: 5V Logic level: 5V / 3.3V (configured via jumper) Overall current (idle mode): 39mA Module sole current (VBAT=3.8V): Idle mode: 10mA Sleep mode: 1.2mA PSM mode: 3.2uA eDRX mode: 0.59mA (eDRX=81.92s) Operating temperature: -40°C ~ 85°C Storage temperature: -45°C ~ 90°C Dimension: 30.2mm x 65mm Package Content 1x SIM7080G Cat-M/NB-IoT HAT 1x LTE Antenna 1x GPS External Antenna (B) 1x USB type A plug to micro plug cable 1x 2×20PIN female header 1x RPi screws pack (2pcs)
LILYGO® TTGO T-Beam V1.1 ESP32 868Mhz LoRa with GPS, 18650 Battery Holder & SoftRF LILYGO® TTGO T-Beam V1.1 ESP32 868Mhz LoRa with GPS, 18650 Battery Holder & SoftRF
LILYGO® TTGO T-Beam V1.1 ESP32 868Mhz LoRa with GPS, 18650 Battery Holder & SoftRF ₹ 3,999.99
LILYGO® TTGO T-Beam V1.1 ESP32 868Mhz LoRa (alternate for SX1276) Wireless Bluetooth GPS NEO-6M Module, with 18650 Battery Holder & SoftRF is your perfect LoRa companion.  ESP32 Features Lastest ESP32 Version: REV1 WIFI Bluetooth  8MB PSRAM 4MB Flash 3D Antenna LORA Working voltage: 1.8~3.7v Acceptable current:10~14mA Transmit current: 120mA@+20dBm, 90mA@+17dBm, 29mA@+13dBm Operating frequency: 868MHz version Transmit power: +20dBm Receive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps -136dBm@LoRa &125Khz&SF=12&293bps -118dBm@LoRa &125Khz&SF=6&9380bps -123dBm@FSK&5Khz&1.2Kbps Frequency error:+/-15KHz FIFO space :     64Byte Data rate :1.2K~300Kbps@FSK                    0.018K~37.5Kbps@LoRa         Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK Interface form : SPI Sleep current :0.2uA@SLEEP & 1.5uA@IDLE Operating temperature :-40℃- +85℃ Digital RSSI function Automatic frequency correction Automatic gain control  Low voltage detection and temperature sensor Fast wake-up and frequency hopping Highly configurable data packet handler GPS GPS modules NEO-6M, 3V-5V power supply Universal Destined module with ceramic antenna, signal super Save the configuration parameter data EEPROM Down With data backup battery There are LED signal indicator Default Baud Rate: 9600  Power Power Supply Input USB 5V/1A Charging current 500mA Battery Input  3.7-4.2V Charge IC AXP192    More information: https://github.com/lyusupov/SoftRF/wiki/Prime-Edition-MkII https://github.com/LilyGO/SoftRF  https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Secure Checkout

We are PCI-DSS compliant and use 256 bit SSL encryption.

Instant Dispatch

99% of our orders are shipped within 24 hours.

Bulk Orders

Use the contact form for bulk order quotes.

Call us (Weekdays)

+91 93183 94903
Airtel Money Amazon American Express Diners Club Freecharge Google Pay Maestro Mastercard MobiKwik Ola Money PayPal Paytm RuPay Visa