BL Touch Automatic Bed Leveling Sensor
BL Touch Precision Auto Bed Leveling Sensor Kit 3D Touch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It greatly improves the printing ...
Magigoo Original – 3d printing glue
All you need for sure adhesion of 3D prints. Magigoo is an easy-to-use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures strong adhesion to the hot pl...
eSun eVacuum Kit
The 3D printing filament vacuum kit is a novel portable household vacuum device for vacuum storage of filaments, especially for some with high water absorption rate, such as PVA, ePA, ePA-CF, ePA-...
eSun eBOX Lite 3D Printing Filament Storage and Dryer
The eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Comp...
3Dpen-2 3D printing pen
The 3Dpen-2 3D Printing Pen is a small, light and ergonomic 3D pen. It is easy in usage: the display shows the temperature, while the adjustment can be made with an accuracy of one degree. The 3Dp...
Slice Engineering: Boron Nitride Thermal Paste
Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heat...
3D Print Removal Tool - Scraper
Durable, rigid construction; no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings! Long knife with a beveled front edge; Slides very gently underneath print...
Slice Engineering: Vanadium Nozzle™
Would you like an indestructible nozzle? Try ours out. With a 64 Rockwell C hardness (Vickers HV 910) minimum rating, and the highest hot hardness on the market (compared to other metallic nozzles)...
Slice Engineering: High Quality Hotend Cooling Fan
Regular price from ₹ 599.99
Sale price from ₹ 599.99
High quality 25 mm box fan with dual Japanese bearings Molex Micro-Fit 3.0 connector Mounts directly to the Mosquito® Hotend, Mosquito® Magnum, or Copperhead™ with included hardware Avail...
Polyamide High temperature resistant Kapton Tape 98 ft
Extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in the electronics industry. Specifications: Self-adhesive on one side Size: 9...
Nano Polymer Adhesive, 120ml bottle
Nano Polymer Adhesive Bed Prep This is a world-class bed prep Nano Polymer Adhesive designed for use while printing high-temp polymers but it also works great for engineering and general purpose g...
3D Printing Pen SUNLU SL-300
Regular price from ₹ 3,499.99
Sale price from ₹ 3,499.99
The SL-300 3D pen is a handy, top-quality 3D pen that is ideal for children, creative people and 3D enthusiasts. Ergonomic design & easy use: The ergonomic design and the high quality workmans...
38% Off Sold Out
5V 5015 Radial Cooling Fan
Perfect drop in replacement for Prusa MK3 blower fan. This is the ideal part cooling fan to replace the radial fan that comes with your original Prusa printers. Specification: Supply voltage:...
Magigoo Pro PA - for Nylon
Magigoo Pro PA is designed for professional use, to work exclusively withPolyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily c...
Prusa i3 MK3S MK2S Heatbed Thermistor NTC 3950 100k
The thermistor head is specially designed for Prusa i3 MK2S/MK3 3D Printer heated. The connector is special design for MK3S Einsy Rambo motherboard Wiring length: 1 meter Temperature sensor 100KΩ ...
32% Off Sold Out
Frosted Cold PEI Sheet For Prusa i3 MK3S
PEI sheet for Prusa Mk3 or Mk2.5 for replacement on flexible metal Sheet Spring. Notched For Prusa MK3 Or Mk2.5, perfect for metal sheets compatible with MK52 heatbed. Size: 253.8mm X 241mm X...
Adjustable 3D Printing Filament Spool Holder
Specification: Weight: about 308g Packing size: about 20cm X 14cm X 20cm / 7.87" X 5.51" X 7.87" Applicable models: for ender-3, for ender-3S, for ender-3PRO, for CR-10, for CR-10S, for CR-10SPRO ...
12V 5015 DC Radial Fan
Excellent for use as Print fans, made of high quality PBT+30% glass line with high precision bearing offering long life and low noise. Temperature of usage environment:－20℃～75℃ Service life: ...
PL-08N Inductive Bed Leveling Probe for Voron 2.4
FYSETC VORON 2.2/2.4 3d printer Auto-leveling Sensor, PL-08N inductive probe soldered with 2.1 meters long cable. This is the original TL-Q5M sensor from Omron.
Slice Engineering: Copperhead™ Heat Break Rep Rap 1.75mm
Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep Copperhead™ Heat Breaks come in multiple variants to adapt to numerous 3D printers. Use t...
DC 24V 4010 3D Printer Hotend Cooling Fan - High Quality
This High quality brushless 24V Cooling Fan for 3D Printer Hotends fits perfectly, and offers powerful cooling. It has a two-pin connector to connect in a printer controller. Fan operates at 24V...
Slice Engineering: Filament Drying Desiccant
Wet 3D printing filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can actually be traced back to filament that has absorbed too much mo...
Slice Engineering: Mosquito® Magnum Professional Hotend
Regular price ₹ 19,699.99
Sale price ₹ 19,699.99
The Mosquito® Magnum is adaptable to virtually any printer, so by swapping one component, you have the high performance benefits of a printer worth thousands more. Since the Mosquito® (designed for...
Copper Brush for Cleaning Nozzles and Hotends Nozzle cleaning copper wire brush can be used for cleaning, derusting, decontamination and deburring. Its medium hard copper wire brush head, compact d...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device