-10% sale
NVIDIA Jetson Nano Case NVIDIA Jetson Nano Case
NVIDIA Jetson Nano Case ₹ 1,175.99 ₹ 1,300.00
NVIDIA Jetson Nano Case is a newly designed case compatible with the Jetson Nano Developer Kit (For the original version and B01 version) (Case only).  It is a powerful 3D printed case to protect the Jetson Nano Developer kit. The case is durable and lets the kit fit-in easily. It allows running multiple networks at the same time. The case supports a power switch and resets the switch. It has a separate space for the antenna to connect the kit wirelessly, also a separate cut out for the ventilation fan. The case has dedicated space to insert a sim/micro card. 3D printed NVIDIA Jetson Nano Case does a great job by supporting the kit. Our 3D printing case gives an amazing look to the kit.   NVIDIA Jetson Nano Case is a fully 3d printed product. It is designed with environment-friendly material. The case can be customized as per the requirement. The top of the case is designed to control the heat of the NVIDIA Jetson Nano kit. The case is sturdy and covered with the protection film to protect from any scratches till the time it reaches you. It is small in size, powerful and affordable for everyone.  Specifications Material: PLA(Polylactide) Color: Available on demand Size: 115mm * 90mm * 65mm (L * B * H) Compatible with: NVIDIA Jetson Nano Separate cut out for ventilation fan
-7% sale
NVIDIA Jetson Xavier Case NVIDIA Jetson Xavier Case
NVIDIA Jetson Xavier Case ₹ 1,119.99 ₹ 1,200.00
NVIDIA Jetson Xavier Case is a newly designed case compatible with the Jetson Xavier NX Developer Kit that brings a supercomputer performance to the edge in a small form factor system-on-module (SOM). It is a fully 3D Printed Product and is made up of eco-friendly material. The case can be customized as per your requirements. This case is dustproof and also has cutouts for the ventilation fan.  The premium quality finishes Xavier case is much better than the metal case as it erodes the problem of rust or corrosion and is also lightweight. Its unique design makes it attractive and also flexible to use. The cuts are made at the appropriate places which allow the air to pass easily. The material is very sturdy which makes this case strong.  It is covered with theprotection film to protect from any scratches till the time it reaches you. The best part about this product is that the amazingly designed camera holder (color in contrast with the case ) is also provided with it. It is a powerful 3D printed case to protect the Jetson Xavier  NX  Developer Kit. The case is durable and It allows running multiple networks at the same time. The case supports a power switch and resets the switch. It has a separate space for the antenna to connect the kit wirelessly, also a separate cut out for the ventilation fan. The case has a dedicated cutout to insert a sim/micro card. 3D printed NVIDIA Jetson Xavier Case does a great job by supporting the Jetson Xavier  NX. The top of the case is designed to control the heat of the NVIDIA Jetson  Xavier  NX  Developer Kit. It is small in size, and the price is cheap as compared to the metal case for the NVIDIA Jetson Xavier NX Developer Kit. The Jetson board is not included with the purchase of the NVIDIA Jetson Xavier Case.   Specifications Material: PLA(Polylactide) Color: Available on demand Size: 115mm * 90mm * 65mm (L * B * H) Compatible with: NVIDIA Jetson Xavier NX Developer Kit Separate cut out for ventilation fan Camera holder is available Dedicated space for SD and Micro card
-22% sale
Asus Tinkerboard Case Asus Tinkerboard Case
Asus Tinkerboard Case ₹ 469.99 ₹ 599.00
Tinker Board is a Single Board Computer (SBC) in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The Tinker Board offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality. This case is fully 3D Printed and made for geeks like you! It uses an eco-friendly material and can be customized according to your requirements. This case also has cut outs for GPIO pins as well as ventilation fan.  Tinker Board not included. Specifications Color: may vary based on availability. (contact us for customizations) Material: PLA Size: 60mm * 61mm * 26mm (L * B * H)  
-2% sale
RP Lidar A1M8 Case RP Lidar A1M8 Case
RP Lidar A1M8 Case ₹ 879.99 ₹ 895.00
RPLIDAR A1 is a low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. The system can perform 360 degree scan within 12-meter range (6-meter range of A1M8-R4 and the bellowing models). The produced 2D point cloud data can be used in mapping, localization and object/environment modeling. This case is fully 3D Printed and made for geeks like you! It uses an eco-friendly material and can be customized according to your requirements.  RPLIDAR not included.  Specifications Color: may vary based on availability. (contact us for customizations) Material: PLA Size: 114mm * 88mm * 50mm (L * B * H)
Phone/Tablet Adjustable Stand Phone/Tablet Adjustable Stand
Phone/Tablet Adjustable Stand ₹ 429.99
This is an Eco-Friendly phone / tablet stand. This 3D printed product has 5 levels of adjustment with 15mm difference. It is a low cost product and is printed with high class material that can support 12" tablets as well.   The structure of the mobile stand is attractive and simple at the same time. The 3D Printed Product is foldable and is very easy to store. The mobile or tablet adjusts easily on the stand and changing the alignment of the stand to set the screen does not take any effort. It is lightweight, sturdy and the design gives the required inclination to your devices. With just 121  grams it’s very lightweight and its dimensions are suitable for your office desks, study table ,  kitchen table etc . It's concise and easy design makes it stylish and good looking and the appropriate ratio of the length, width and height makes it more solid. It is 3 times more sturdy and may be the most solid phone stand you have ever tried. It has a slant design which gives a perfect angle of your device on the desk so you can easily and privately see incoming calls, respond to messages without the trouble of peeping. When you put your phone, say  iPhone 7 (without case) on this stand, the viewing angle could be adjusted from 40 to 45 degrees, which is suitable for your multiple demands of viewing.  The stand easily holds smartphones and tablets upto the size of 8 inches. Mobile Phones, E-Readers and most Tablets  are compatible with the stand even with the heavy case on.  Made up of high-quality environmental engineering plastic material, effective to reduce travel weight and is eco - friendly.  Specifications Colour: Orange and Black  Colors are also available on demand Size: 110 mm *  95 mm Weight: 121 grams Compatible with: Smartphones, Tablets Material: Eco - Friendly High Quality Engineering Plastic Material Adjustable height

Secure Checkout

We are PCI-DSS compliant and use 256 bit SSL encryption.

Instant Dispatch

99% of our orders are shipped within 24 hours.

Bulk Orders

Use the contact form for bulk order quotes.

Call us (Weekdays)

+91 93183 94903
Airtel Money Amazon American Express Diners Club Freecharge Google Pay Maestro Mastercard MobiKwik Ola Money PayPal Paytm RuPay Visa